How to apply decorative plaster – some subtleties of working with the material
Decorative plaster is one of the most popular finishing materials. It makes the room modern, original and spectacular, has a long service life, hides minor flaws in the base. To make a beautiful coating pleasing to the eye for a long time, you need to properly prepare the surface and apply the material. In this article, we will tell you how to apply decorative plaster, and what are the subtleties of working with it.
Any finishing material, including decorative plaster, must be applied to a well-prepared substrate and in compliance with the attached instructions.
Surface preparation
How to apply decorative plaster? First of all, you need to prepare the foundation:
1. Plaster and level, putty the walls (these can be brick, concrete, GKL, chipboard, fiberboard surfaces).
2. Eliminate existing surface defects (cracks, etc.) with general construction putties and plasters (it is expensive and irrational to do this with decorative plasters).
3. Treat the walls with deep penetration primer.
Thus, before applying decorative plaster, you need to take care of the walls: they must be smooth, without defects, waterproof, durable.
Preparation of materials and tools, start of work
To apply decorative plaster, you will need a set of tools, the choice of which depends on the type of finishing material. As a rule, patterns are created with a trowel and a spatula, a sea fur coat, as well as a brush, a special brush, a roller, and even a cellophane bag or by hand.
Before applying decorative plaster, you need to take care of ready-made foundations: the floor coverings need to be covered with a film, the ceiling and the slopes around the perimeter should be glued with masking tape. Sockets and switches, as well as baseboards and platbands, are removed or taped over.
Before applying decorative plaster, you need to study the instructions for it. It is important to find out how long the interval takes from the beginning of the application of the material to the beginning of hardening. For example, if this period is short (about 15 minutes), then you will have to work with such a material with an assistant: one will apply decorative plaster, and the second will give it texture.
There are various ways to give a pattern to a layer of decorative plaster: short or long, longitudinal or transverse, smooth or rough strokes, as well as dots, slaps, rolling a roller, etc. After the decorative plaster is completely dry, additional paints, lapis lazuli, waxes, etc. are applied.
At the end of the finishing work, you need to wait for the material to dry, and only then – to hang paintings, cornices, and arrange furniture. Best porn site https://noodlemagazine.com - Watch porn.
Any finishing material, including decorative plaster, must be applied to a well-prepared substrate and in compliance with the attached instructions.
Surface preparation
How to apply decorative plaster? First of all, you need to prepare the foundation:
1. Plaster and level, putty the walls (these can be brick, concrete, GKL, chipboard, fiberboard surfaces).
2. Eliminate existing surface defects (cracks, etc.) with general construction putties and plasters (it is expensive and irrational to do this with decorative plasters).
3. Treat the walls with deep penetration primer.
Thus, before applying decorative plaster, you need to take care of the walls: they must be smooth, without defects, waterproof, durable.
Preparation of materials and tools, start of work
To apply decorative plaster, you will need a set of tools, the choice of which depends on the type of finishing material. As a rule, patterns are created with a trowel and a spatula, a sea fur coat, as well as a brush, a special brush, a roller, and even a cellophane bag or by hand.
Before applying decorative plaster, you need to take care of ready-made foundations: the floor coverings need to be covered with a film, the ceiling and the slopes around the perimeter should be glued with masking tape. Sockets and switches, as well as baseboards and platbands, are removed or taped over.
Before applying decorative plaster, you need to study the instructions for it. It is important to find out how long the interval takes from the beginning of the application of the material to the beginning of hardening. For example, if this period is short (about 15 minutes), then you will have to work with such a material with an assistant: one will apply decorative plaster, and the second will give it texture.
There are various ways to give a pattern to a layer of decorative plaster: short or long, longitudinal or transverse, smooth or rough strokes, as well as dots, slaps, rolling a roller, etc. After the decorative plaster is completely dry, additional paints, lapis lazuli, waxes, etc. are applied.
At the end of the finishing work, you need to wait for the material to dry, and only then – to hang paintings, cornices, and arrange furniture. Best porn site https://noodlemagazine.com - Watch porn.
